.. _tutorial-objects-and-classes:
================================================
Tutorial: Objects and Classes in Python and Sage
================================================
.. MODULEAUTHOR:: Florent Hivert
.. linkall
This tutorial is an introduction to object-oriented programming in Python and
Sage. It requires basic knowledge about imperative/procedural programming (the
most common programming style) -- that is, conditional instructions, loops,
functions (see the "Programming" section of the Sage tutorial) -- but no further knowledge
about objects and classes is assumed. It is designed as an alternating
sequence of formal introduction and exercises. :ref:`solutions` are given at
the end.
Foreword: variables, names and objects
======================================
As an object-oriented language, Python's ''variables'' behavior may be
surprising for people used to imperative languages like C or Maple. The reason
is that they are **not variables but names**.
The following explanation is `borrowed from
David Goodger `_.
Other languages have "variables"
================================
.. container:: handout
In many other languages, assigning to a variable puts a value into
a box.
.. list-table::
:class: incremental borderless
* - ::
int a = 1;
- .. image:: media/a1box.png
:class: incremental
.. container:: handout
Box "a" now contains an integer 1.
Assigning another value to the same variable replaces the contents
of the box:
.. list-table::
:class: incremental borderless
* - ::
a = 2;
- .. image:: media/a2box.png
:class: incremental
.. container:: handout
Now box "a" contains an integer 2.
Assigning one variable to another makes a copy of the value and
puts it in the new box:
.. list-table::
:class: incremental borderless
* - ::
int b = a;
- .. image:: media/b2box.png
:class: incremental
- .. image:: media/a2box.png
:class: incremental
.. container:: handout
"b" is a second box, with a copy of integer 2. Box "a" has a
separate copy.
Python has "names"
==================
.. container:: handout
In Python, a "name" or "identifier" is like a parcel tag (or
nametag) attached to an object.
.. list-table::
:class: incremental borderless
* - ::
a = 1
- .. image:: media/a1tag.png
:class: incremental
.. container:: handout
Here, an integer 1 object has a tag labelled "a".
If we reassign to "a", we just move the tag to another object:
.. list-table::
:class: incremental borderless
* - ::
a = 2
- .. image:: media/a2tag.png
:class: incremental
- .. image:: media/1.png
:class: incremental
.. container:: handout
Now the name "a" is attached to an integer 2 object.
The original integer 1 object no longer has a tag "a". It may live
on, but we can't get to it through the name "a". (When an object
has no more references or tags, it is removed from memory.)
If we assign one name to another, we're just attaching another
nametag to an existing object:
.. list-table::
:class: incremental borderless
* - ::
b = a
- .. image:: media/ab2tag.png
:class: incremental
.. container:: handout
The name "b" is just a second tag bound to the same object as "a".
Although we commonly refer to "variables" even in Python (because
it's common terminology), we really mean "names" or "identifiers".
In Python, "variables" are nametags for values, not labelled boxes.
.. warning::
As a consequence, when there are **two tags** "a" and "b" on the **same
object**, modifying the object tagged "b" also modifies the object tagged
"a"::
sage: a = [1,2,3]
sage: b = a
sage: b[1] = 0
sage: a
[1, 0, 3]
Note that reassigning the tag "b" (rather than modifying the object
with that tag) doesn't affect the object tagged "a"::
sage: b = 7
sage: b
7
sage: a
[1, 0, 3]
Object-oriented programming paradigm
====================================
The **object-oriented programming** paradigm relies on the two following
fundamental rules:
1. Anything of the real (or mathematical) world which needs to be manipulated
by the computer is modeled by an **object**.
#. Each object is an **instance** of some **class**.
At this point, those two rules are a little meaningless, so let's give some
more or less precise definitions of the terms:
--------------------
**object**
a **portion of memory** which contains the information needed to model
the real world thing.
**class**
defines the **data structure** used to store the objects which are instances
of the class together with their **behavior**.
--------------------
Let's start with some examples: We consider the vector space over `\QQ` whose
basis is indexed by permutations, and a particular element in it:
::
sage: F = CombinatorialFreeModule(QQ, Permutations())
sage: el = 3*F([1,3,2])+ F([1,2,3])
sage: el
B[[1, 2, 3]] + 3*B[[1, 3, 2]]
(For each permutation, say ``[1, 3, 2]``, the corresponding element in
``F`` is denoted by ``B[[1, 3, 2]]`` -- in a ``CombinatorialFreeModule``,
if an element is indexed by ``x``, then by default its print
representation is ``B[x]``.)
In Python, everything is an object so there isn't any difference between types
and classes. One can get the class of the object ``el`` by::
sage: type(el)
As such, this is not very informative. We'll come back to it later. The data
associated to objects are stored in so-called **attributes**. They are
accessed through the syntax ``obj.attribute_name``. For an element of a
combinatorial free module, the main attribute is called
``_monomial_coefficients``. It is a dictionary associating coefficients to
indices::
sage: el._monomial_coefficients
{[1, 2, 3]: 1, [1, 3, 2]: 3}
Modifying the attribute modifies the objects::
sage: el._monomial_coefficients[Permutation([3,2,1])] = 1/2
sage: el
B[[1, 2, 3]] + 3*B[[1, 3, 2]] + 1/2*B[[3, 2, 1]]
.. warning:: as a user, you are *not* supposed to do such a modification by
yourself (see note on :ref:`private attributes
` below).
As an element of a vector space, ``el`` has a particular behavior::
sage: 2*el
2*B[[1, 2, 3]] + 6*B[[1, 3, 2]] + B[[3, 2, 1]]
sage: el.support()
[[1, 2, 3], [1, 3, 2], [3, 2, 1]]
sage: el.coefficient([1, 2, 3])
1
The behavior is defined through **methods** (``support``, ``coefficient``). Note
that this is true even for equality, printing or mathematical operations. For
example, the call ``a == b`` actually is translated to the method call
``a.__eq__(b)``. The names of those special methods which are usually called
through operators are fixed by the Python language and are of the form
``__name__``. Examples include ``__eq__`` and ``__le__`` for operators ``==`` and
``<=``, ``__repr__`` (see :ref:`sage_specifics`) for printing, ``__add__`` and
``__mult__`` for operators ``+`` and ``*``. See
http://docs.python.org/library/ for a complete list. ::
sage: el.__eq__(F([1,3,2]))
False
sage: el.__repr__()
'B[[1, 2, 3]] + 3*B[[1, 3, 2]] + 1/2*B[[3, 2, 1]]'
sage: el.__mul__(2)
2*B[[1, 2, 3]] + 6*B[[1, 3, 2]] + B[[3, 2, 1]]
Some particular actions modify the data structure of ``el``::
sage: el.rename("bla")
sage: el
bla
.. note::
The class is stored in a particular attribute called ``__class__``,
and the normal attributes are stored in a dictionary called ``__dict__``::
sage: F = CombinatorialFreeModule(QQ, Permutations())
sage: el = 3*F([1,3,2])+ F([1,2,3])
sage: el.rename("foo")
sage: el.__class__
sage: el.__dict__
{'__custom_name': 'foo',
'_monomial_coefficients': {[1, 2, 3]: 1, [1, 3, 2]: 3}}
Lots of Sage objects are not Python objects but compiled Cython
objects. Python sees them as builtin objects and you don't have access to
the data structure. Examples include integers and permutation group
elements::
sage: e = Integer(9)
sage: type(e)
sage: e.__dict__
}>
sage: e.__dict__.keys()
['__module__', '_reduction', '__doc__', '_sage_src_lines_']
sage: id4 = SymmetricGroup(4).one()
sage: type(id4)
sage: id4.__dict__
}>
.. note::
Each object corresponds to a portion of memory called its **identity** in
Python. You can get the identity using ``id``::
sage: el = Integer(9)
sage: id(el) # random
139813642977744
sage: el1 = el; id(el1) == id(el)
True
sage: el1 is el
True
In Python (and therefore in Sage), two objects with the same
identity will be equal, but the converse is not true in general.
Thus the identity function is different from mathematical
identity::
sage: el2 = Integer(9)
sage: el2 == el1
True
sage: el2 is el1
False
sage: id(el2) == id(el)
False
Summary
-------
To define some object, you first have to write a **class**. The class will
define the methods and the attributes of the object.
**method**
particular kind of function associated with an object used to get
information about the object or to manipulate it.
**attribute**
variable where information about the object is stored.
An example: glass of beverage in a restaurant
---------------------------------------------
Let's write a small class about glasses in a restaurant::
sage: class Glass(object):
....: def __init__(self, size):
....: assert size > 0
....: self._size = float(size) # an attribute
....: self._content = float(0.0) # another attribute
....: def __repr__(self):
....: if self._content == 0.0:
....: return "An empty glass of size %s"%(self._size)
....: else:
....: return "A glass of size %s cl containing %s cl of water"%(
....: self._size, self._content)
....: def fill(self):
....: self._content = self._size
....: def empty(self):
....: self._content = float(0.0)
Let's create a small glass::
sage: myGlass = Glass(10); myGlass
An empty glass of size 10.0
sage: myGlass.fill(); myGlass
A glass of size 10.0 cl containing 10.0 cl of water
sage: myGlass.empty(); myGlass
An empty glass of size 10.0
Some comments:
1. The definition of the class ``Glass`` defines two attributes,
``_size`` and ``_content``. It defines four methods, ``__init__``,
``__repr__``, ``fill``, and ``empty``. (Any instance of this class
will also have other attributes and methods, inherited from the
class ``object``. See :ref:`Inheritance ` below.)
#. The method ``__init__`` is used to initialize the object: it is used by the
so-called **constructor** of the class that is executed when calling
``Glass(10)``.
#. The method ``__repr__`` returns a string which is used to
print the object, for example in this case when evaluating ``myGlass``.
.. note:: **Private Attributes**
.. _private_attributes:
- Most of the time, in order to ensure consistency of the data structures,
the user is not supposed to directly change certain attributes of an
object. Those attributes are called **private**. Since there is no
mechanism to ensure privacy in Python, the convention is the following:
private attributes have names beginning with an underscore.
- As a consequence, attribute access is only made through methods. Methods
for reading or writing a private attribute are called accessors.
- Methods which are only for internal use are also prefixed with an
underscore.
Exercises
---------
1. Add a method ``is_empty`` which returns true if a glass is empty.
#. Define a method ``drink`` with a parameter ``amount`` which allows one to
partially drink the water in the glass. Raise an error if one asks to
drink more water than there is in the glass or a negative amount of
water.
#. Allows the glass to be filled with wine, beer or another beverage. The method
``fill`` should accept a parameter ``beverage``. The beverage is stored in
an attribute ``_beverage``. Update the method ``__repr__`` accordingly.
#. Add an attribute ``_clean`` and methods ``is_clean`` and ``wash``. At the
creation a glass is clean, as soon as it's filled it becomes dirty,
and it must be washed to become clean again.
#. Test everything.
#. Make sure that everything is tested.
#. Test everything again.
Inheritance
===========
.. _inheritance:
The problem: objects of **different** classes may share a **common behavior**.
For example, if one wants to deal with different dishes (forks, spoons, ...),
then there is common behavior (becoming dirty and being washed). So the
different classes associated to the different kinds of dishes should have the
same ``clean``, ``is_clean`` and ``wash`` methods. But copying and pasting
code is very bad for maintenance: mistakes are copied, and to change anything
one has to remember the location of all the copies. So there is a need for a
mechanism which allows the programmer to factorize the common behavior. It is called
**inheritance** or **sub-classing**: one writes a base class which factorizes
the common behavior and then reuses the methods from this class.
We first write a small class ''AbstractDish'' which implements the
"clean-dirty-wash" behavior::
sage: class AbstractDish(object):
....: def __init__(self):
....: self._clean = True
....: def is_clean(self):
....: return self._clean
....: def state(self):
....: return "clean" if self.is_clean() else "dirty"
....: def __repr__(self):
....: return "An unspecified %s dish"%self.state()
....: def _make_dirty(self):
....: self._clean = False
....: def wash(self):
....: self._clean = True
Now one can reuse this behavior within a class ``Spoon``::
sage: class Spoon(AbstractDish): # Spoon inherits from AbstractDish
....: def __repr__(self):
....: return "A %s spoon"%self.state()
....: def eat_with(self):
....: self._make_dirty()
Let's test it::
sage: s = Spoon(); s
A clean spoon
sage: s.is_clean()
True
sage: s.eat_with(); s
A dirty spoon
sage: s.is_clean()
False
sage: s.wash(); s
A clean spoon
Summary
-------
1. Any class can reuse the behavior of another class. One says that the
subclass **inherits** from the superclass or that it **derives** from it.
#. Any instance of the subclass is also an instance of its superclass::
sage: type(s)
sage: isinstance(s, Spoon)
True
sage: isinstance(s, AbstractDish)
True
#. If a subclass redefines a method, then it replaces the former one. One says
that the subclass **overloads** the method. One can nevertheless explicitly
call the hidden superclass method.
::
sage: s.__repr__()
'A clean spoon'
sage: Spoon.__repr__(s)
'A clean spoon'
sage: AbstractDish.__repr__(s)
'An unspecified clean dish'
.. note:: **Advanced superclass method call**
Sometimes one wants to call an overloaded method without knowing in which
class it is defined. To do this, use the ``super`` operator::
sage: super(Spoon, s).__repr__()
'An unspecified clean dish'
A very common usage of this construct is to call the ``__init__`` method of the
superclass::
sage: class Spoon(AbstractDish):
....: def __init__(self):
....: print "Building a spoon"
....: super(Spoon, self).__init__()
....: def __repr__(self):
....: return "A %s spoon"%self.state()
....: def eat_with(self):
....: self._make_dirty()
sage: s = Spoon()
Building a spoon
sage: s
A clean spoon
Exercises
---------
1. Modify the class ``Glasses`` so that it inherits from ``Dish``.
#. Write a class ``Plate`` whose instance can contain any meal together with
a class ``Fork``. Avoid as much as possible code duplication (hint:
you can write a factorized class ``ContainerDish``).
#. Test everything.
.. _sage_specifics:
Sage specifics about classes
============================
Compared to Python, Sage has particular ways to handle objects:
- Any classes for mathematical objects in Sage should inherit from
:class:`SageObject` rather than from ``object``. Most of the time, they
actually inherit from a subclass such as :class:`Parent` or
:class:`Element`.
- Printing should be done through ``_repr_`` instead of ``__repr__`` to allow
for renaming.
- More generally, Sage-specific special methods are usually named ``_meth_``
rather than ``__meth__``. For example, lots of classes implement ``_hash_``
which is used and cached by ``__hash__``. In the same vein, elements of a
group usually implement ``_mul_``, so that there is no need to take care
about coercions as they are done in ``__mul__``.
For more details, see the Sage Developer's Guide.
.. _solutions:
Solutions to the exercises
==========================
1. Here is a solution to the first exercise::
sage: class Glass(object):
....: def __init__(self, size):
....: assert size > 0
....: self._size = float(size)
....: self.wash()
....: def __repr__(self):
....: if self._content == 0.0:
....: return "An empty glass of size %s"%(self._size)
....: else:
....: return "A glass of size %s cl containing %s cl of %s"%(
....: self._size, self._content, self._beverage)
....: def content(self):
....: return self._content
....: def beverage(self):
....: return self._beverage
....: def fill(self, beverage = "water"):
....: if not self.is_clean():
....: raise ValueError("Don't want to fill a dirty glass")
....: self._clean = False
....: self._content = self._size
....: self._beverage = beverage
....: def empty(self):
....: self._content = float(0.0)
....: def is_empty(self):
....: return self._content == 0.0
....: def drink(self, amount):
....: if amount <= 0.0:
....: raise ValueError("amount must be positive")
....: elif amount > self._content:
....: raise ValueError("not enough beverage in the glass")
....: else:
....: self._content -= float(amount)
....: def is_clean(self):
....: return self._clean
....: def wash(self):
....: self._content = float(0.0)
....: self._beverage = None
....: self._clean = True
#. Let's check that everything is working as expected::
sage: G = Glass(10.0)
sage: G
An empty glass of size 10.0
sage: G.is_empty()
True
sage: G.drink(2)
Traceback (most recent call last):
...
ValueError: not enough beverage in the glass
sage: G.fill("beer")
sage: G
A glass of size 10.0 cl containing 10.0 cl of beer
sage: G.is_empty()
False
sage: G.is_clean()
False
sage: G.drink(5.0)
sage: G
A glass of size 10.0 cl containing 5.0 cl of beer
sage: G.is_empty()
False
sage: G.is_clean()
False
sage: G.drink(5)
sage: G
An empty glass of size 10.0
sage: G.is_clean()
False
sage: G.fill("orange juice")
Traceback (most recent call last):
...
ValueError: Don't want to fill a dirty glass
sage: G.wash()
sage: G
An empty glass of size 10.0
sage: G.fill("orange juice")
sage: G
A glass of size 10.0 cl containing 10.0 cl of orange juice
#. Here is the solution to the second exercice::
sage: class AbstractDish(object):
....: def __init__(self):
....: self._clean = True
....: def is_clean(self):
....: return self._clean
....: def state(self):
....: return "clean" if self.is_clean() else "dirty"
....: def __repr__(self):
....: return "An unspecified %s dish"%self.state()
....: def _make_dirty(self):
....: self._clean = False
....: def wash(self):
....: self._clean = True
sage: class ContainerDish(AbstractDish):
....: def __init__(self, size):
....: assert size > 0
....: self._size = float(size)
....: self._content = float(0)
....: super(ContainerDish, self).__init__()
....: def content(self):
....: return self._content
....: def empty(self):
....: self._content = float(0.0)
....: def is_empty(self):
....: return self._content == 0.0
....: def wash(self):
....: self._content = float(0.0)
....: super(ContainerDish, self).wash()
sage: class Glass(ContainerDish):
....: def __repr__(self):
....: if self._content == 0.0:
....: return "An empty glass of size %s"%(self._size)
....: else:
....: return "A glass of size %s cl containing %s cl of %s"%(
....: self._size, self._content, self._beverage)
....: def beverage(self):
....: return self._beverage
....: def fill(self, beverage = "water"):
....: if not self.is_clean():
....: raise ValueError("Don't want to fill a dirty glass")
....: self._make_dirty()
....: self._content = self._size
....: self._beverage = beverage
....: def drink(self, amount):
....: if amount <= 0.0:
....: raise ValueError("amount must be positive")
....: elif amount > self._content:
....: raise ValueError("not enough beverage in the glass")
....: else:
....: self._content -= float(amount)
....: def wash(self):
....: self._beverage = None
....: super(Glass, self).wash()
#. Let's check that everything is working as expected::
sage: G = Glass(10.0)
sage: G
An empty glass of size 10.0
sage: G.is_empty()
True
sage: G.drink(2)
Traceback (most recent call last):
...
ValueError: not enough beverage in the glass
sage: G.fill("beer")
sage: G
A glass of size 10.0 cl containing 10.0 cl of beer
sage: G.is_empty()
False
sage: G.is_clean()
False
sage: G.drink(5.0)
sage: G
A glass of size 10.0 cl containing 5.0 cl of beer
sage: G.is_empty()
False
sage: G.is_clean()
False
sage: G.drink(5)
sage: G
An empty glass of size 10.0
sage: G.is_clean()
False
sage: G.fill("orange juice")
Traceback (most recent call last):
...
ValueError: Don't want to fill a dirty glass
sage: G.wash()
sage: G
An empty glass of size 10.0
sage: G.fill("orange juice")
sage: G
A glass of size 10.0 cl containing 10.0 cl of orange juice
.. todo:: give the example of the class ``Plate``.
That all folks !